Liqui Moly Engine Flush Additive 250ml

Professional cleaning fluid for removing harmful deposits inside the engine. Removes sludge and varnish-like residue formations. All oil-soluble and non-oil-soluble residues are loosened and disappear during the subsequent oil change, allowing the clean engine and fresh oil to develop their full power.

Benefits:

• Easy to use
• Compatible with common sealing materials
• Tested for catalytic converters
• High cost-effectiveness
• Long engine life
• Effective cleaning and maintenance
• Ensures the maintenance of the engine's original performance

Suitable for:

Washes and cleans oil circuits in motorcycles with 4-stroke gasoline engines. Compatible with commercially available engine oils. Suitable for motorcycles with wet clutches.

The frequency of use depends on the degree of contamination of the oil circuit and the quality of the oil used.

Application

Dosage: 250 ml (1 can) is sufficient for up to 4.5 liters of oil fill.

Instructions for use:

1. Add the product to the warm engine oil before the oil change.
2. Let the engine run for approximately 10 minutes at idle.
3. For manual gearboxes, actuate the clutch pedal several times during this time and keep the pedal pressed for a few seconds each time.
4. Perform the oil and filter change.

Result: Clean engine, ready to receive fresh oil and develop its full power.